How To Repair Broken PSP UMDs

Broken UMDs are really a pain in the bum but the good thing is that there is a way back. A custom way to restore its playability but not exactly its original form.

So, all you will need is a broken UMD some Scotch tape and a cutter.

Steps:

1. Cut a piece of the scotch tape and stick it on the UMD as show below

2. Press it well to stick really good on the plastic (you don want to any small pieces to fall into your console)

3. With the cutters cut the excessive part of tha tape so it is covered only on the narrow side

4. Now the cut tape will keep the plastics closed and  prevent the disk from moving back and forth in the console

NOTE: This is a method i found out that it is working and i have repaired many UMDs with it but I dont take any responsibility about any damage you may cause to your UMDs or your console

NOTE#2: I change quite frequently the tape as it tends to leave a glue residue and eventually it falls off after some time so keep that in mind!

NOTE#3: I ve been working on some more permanent method to stick back the UMD casing so keep tuned!